Wood & Plywood Testing Lab in Bengaluru

NABL accredited wood, plywood, and particle board testing at our lab on Bagalur Main Road, Yelahanka, Bengaluru. Moisture content, density, glue shear strength, water resistance, and tensile tests.

Wood & Plywood Quality Testing in Bengaluru

Wood and plywood products used in construction — structural timber, shuttering plywood, decorative plywood, and particle board — must meet IS specifications for moisture, strength, and durability. V2 Civil Diagnostics tests wood for moisture content, density, and specific gravity, and plywood/particle board for glue shear strength, water resistance, adhesion of ply, and tensile strength. All testing follows NABL accredited, ISO/IEC 17025:2017 protocols. Our reports help contractors, interior fit-out firms, and manufacturers in Bengaluru verify material quality before use.

Wood & Plywood Tests We Perform

Our comprehensive testing covers all essential parameters required by Indian Standards and NABL protocols.

Wood Tests Non-NABL

TestStandardAccreditation
Moisture ContentIS 1708Non-NABL
DensityIS 1708Non-NABL

Plywood Tests Non-NABL

TestStandardAccreditation
DensityIS 1734Non-NABL
Moisture ContentIS 1734Non-NABL
Water ResistanceIS 1734Non-NABL
Adhesion of PlyIS 1734Non-NABL
ThicknessIS 1734Non-NABL

Frequently Asked Questions — Wood & Plywood Testing

V2 Civil Diagnostics on Bagalur Main Road, Yelahanka, is a NABL accredited lab offering plywood, particle board, and wood testing per IS 1734 and IS 1708.

We test plywood for glue shear strength, water resistance, adhesion of ply, tensile strength, density, and moisture content per IS 1734.

Yes. Shuttering plywood (used for concrete formwork) is tested for water resistance, glue shear strength, and density to verify it meets the requirements for repeated concrete contact and moisture exposure.

Sample size depends on the test. Typically, multiple cut specimens (150mm x 150mm or as per IS) from each board/sheet are required. Our team will specify exact dimensions when you contact us.

Most tests are completed within 5-7 working days. Water resistance tests may require extended soaking periods.

Yes. We test particle boards per IS 2380 for density, moisture content, tensile strength, and other mechanical properties.

Related Services

Concrete Testing

Cube compression, core extraction, mix design

Brick & Paver Testing

Brick compressive strength, water absorption, density

Steel Testing

Reinforcement bar testing per IS 1786

Ready to Get Your Wood & Plywood Tested?

NABL accredited results. Fast turnaround. Full regulatory acceptance.

REQUEST A QUOTE
Call Get Quote Directions